SealSpec / O-rings / Size chart / AS568-130

AS568-130 O-ring · 1 5/8 ID × 3/32 cross-section

Standard AS568 size -130: 1.612 in inside diameter × 0.103 in cross-section (40.94 × 2.62 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-130 O-ring dimensioned drawing, 1.612 inch ID by 0.103 inch cross-section, outside diameter 1.818 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-130
Inside diameter	1.612 ± 0.015
Cross-section	0.103 ± 0.003
Outside diameter (calculated)	1.818
Nominal	1 5/8 × 1 13/16 × 3/32

Dimensions (mm)

Inside diameter	40.94 ± 0.38
Cross-section	2.62 ± 0.08
Outside diameter (calc.)	46.18

Material options for -130

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -130

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.103 in)

-126 1.362 -127 1.424 -128 1.487 -129 1.549 -130 1.612 -131 1.674 -132 1.737 -133 1.799 -134 1.862

← AS568-129 · AS568-131 → · Full size chart