SealSpec / O-rings / Size chart / AS568-158

AS568-158 O-ring · 4 3/4 ID × 3/32 cross-section

Standard AS568 size -158: 4.737 in inside diameter × 0.103 in cross-section (120.32 × 2.62 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-158 O-ring dimensioned drawing, 4.737 inch ID by 0.103 inch cross-section, outside diameter 4.943 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-158
Inside diameter	4.737 ± 0.030
Cross-section	0.103 ± 0.003
Outside diameter (calculated)	4.943
Nominal	4 3/4 × 4 15/16 × 3/32

Dimensions (mm)

Inside diameter	120.32 ± 0.76
Cross-section	2.62 ± 0.08
Outside diameter (calc.)	125.55

Material options for -158

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -158

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.103 in)

-154 3.737 -155 3.987 -156 4.237 -157 4.487 -158 4.737 -159 4.987 -160 5.237 -161 5.487 -162 5.737

← AS568-157 · AS568-159 → · Full size chart