SealSpec / O-rings / Size chart / AS568-280

AS568-280 O-ring · 14 ID × 1/8 cross-section

Standard AS568 size -280: 13.984 in inside diameter × 0.139 in cross-section (355.19 × 3.53 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-280 O-ring dimensioned drawing, 13.984 inch ID by 0.139 inch cross-section, outside diameter 14.262 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-280
Inside diameter	13.984 ± 0.065
Cross-section	0.139 ± 0.004
Outside diameter (calculated)	14.262
Nominal	14 × 14 1/4 × 1/8

Dimensions (mm)

Inside diameter	355.19 ± 1.65
Cross-section	3.53 ± 0.10
Outside diameter (calc.)	362.25

Material options for -280

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -280

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.139 in)

-276 10.984 -277 11.484 -278 11.984 -279 12.984 -280 13.984 -281 14.984 -282 15.955 -283 16.955 -284 17.955

← AS568-279 · AS568-281 → · Full size chart