SealSpec / O-rings / Size chart / AS568-360

AS568-360 O-ring · 5 7/8 ID × 3/16 cross-section

Standard AS568 size -360: 5.850 in inside diameter × 0.210 in cross-section (148.59 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-360 O-ring dimensioned drawing, 5.850 inch ID by 0.210 inch cross-section, outside diameter 6.270 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-360
Inside diameter	5.850 ± 0.037
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	6.270
Nominal	5 7/8 × 6 1/4 × 3/16

Dimensions (mm)

Inside diameter	148.59 ± 0.94
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	159.26

Material options for -360

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -360

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-356 5.350 -357 5.475 -358 5.600 -359 5.725 -360 5.850 -361 5.975 -362 6.225 -363 6.475 -364 6.725

← AS568-359 · AS568-361 → · Full size chart