SealSpec / O-rings / Size chart / AS568-466

AS568-466 O-ring · 18 1/2 ID × 1/4 cross-section

Standard AS568 size -466: 18.455 in inside diameter × 0.275 in cross-section (468.76 × 6.99 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-466 O-ring dimensioned drawing, 18.455 inch ID by 0.275 inch cross-section, outside diameter 19.005 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-466
Inside diameter	18.455 ± 0.085
Cross-section	0.275 ± 0.006
Outside diameter (calculated)	19.005
Nominal	18 1/2 × 19 × 1/4

Dimensions (mm)

Inside diameter	468.76 ± 2.16
Cross-section	6.99 ± 0.15
Outside diameter (calc.)	482.73

Material options for -466

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -466

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.275 in)

-462 16.455 -463 16.955 -464 17.455 -465 17.955 -466 18.455 -467 18.955 -468 19.455 -469 19.955 -470 20.955

← AS568-465 · AS568-467 → · Full size chart