SealSpec / O-rings / Size chart / AS568-907

AS568-907 O-ring · ID × cross-section

Standard AS568 size -907: 0.530 in inside diameter × 0.082 in cross-section (13.46 × 2.08 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-907 O-ring dimensioned drawing, 0.530 inch ID by 0.082 inch cross-section, outside diameter 0.694 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-907
Inside diameter	0.530 ± 0.007
Cross-section	0.082 ± 0.003
Outside diameter (calculated)	0.694
Nominal	× 7/16 ×

Dimensions (mm)

Inside diameter	13.46 ± 0.18
Cross-section	2.08 ± 0.08
Outside diameter (calc.)	17.63

Material options for -907

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -907

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.082 in)

-907 0.530

← AS568-906 · AS568-908 → · Full size chart