SealSpec / O-rings / Size chart / AS568-004

AS568-004 O-ring · 5/64 ID × 1/16 cross-section

Standard AS568 size -004: 0.070 in inside diameter × 0.070 in cross-section (1.78 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-004 O-ring dimensioned drawing, 0.070 inch ID by 0.070 inch cross-section, outside diameter 0.210 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-004
Inside diameter	0.070 ± 0.005
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.210
Nominal	5/64 × 13/64 × 1/16

Dimensions (mm)

Inside diameter	1.78 ± 0.13
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	5.33

Material options for -004

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -004

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-004 0.070 -005 0.101 -006 0.114 -007 0.145 -008 0.176

← AS568-003 · AS568-005 → · Full size chart