SealSpec / O-rings / Size chart / AS568-006

AS568-006 O-ring · 1/8 ID × 1/16 cross-section

Standard AS568 size -006: 0.114 in inside diameter × 0.070 in cross-section (2.90 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-006 O-ring dimensioned drawing, 0.114 inch ID by 0.070 inch cross-section, outside diameter 0.254 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-006
Inside diameter	0.114 ± 0.005
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.254
Nominal	1/8 × 1/4 × 1/16

Dimensions (mm)

Inside diameter	2.90 ± 0.13
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	6.45

Material options for -006

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -006

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-004 0.070 -005 0.101 -006 0.114 -007 0.145 -008 0.176 -009 0.208 -010 0.239

← AS568-005 · AS568-007 → · Full size chart