SealSpec / O-rings / Size chart / AS568-024

AS568-024 O-ring · 1 1/8 ID × 1/16 cross-section

Standard AS568 size -024: 1.114 in inside diameter × 0.070 in cross-section (28.30 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-024 O-ring dimensioned drawing, 1.114 inch ID by 0.070 inch cross-section, outside diameter 1.254 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-024
Inside diameter	1.114 ± 0.010
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	1.254
Nominal	1 1/8 × 1 1/4 × 1/16

Dimensions (mm)

Inside diameter	28.30 ± 0.25
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	31.85

Material options for -024

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -024

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-020 0.864 -021 0.926 -022 0.989 -023 1.051 -024 1.114 -025 1.176 -026 1.239 -027 1.301 -028 1.364

← AS568-023 · AS568-025 → · Full size chart