SealSpec / O-rings / Size chart / AS568-023

AS568-023 O-ring · 1 1/16 ID × 1/16 cross-section

Standard AS568 size -023: 1.051 in inside diameter × 0.070 in cross-section (26.70 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-023 O-ring dimensioned drawing, 1.051 inch ID by 0.070 inch cross-section, outside diameter 1.191 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-023
Inside diameter	1.051 ± 0.010
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	1.191
Nominal	1 1/16 × 1 3/16 × 1/16

Dimensions (mm)

Inside diameter	26.70 ± 0.25
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	30.25

Material options for -023

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -023

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-019 0.801 -020 0.864 -021 0.926 -022 0.989 -023 1.051 -024 1.114 -025 1.176 -026 1.239 -027 1.301

← AS568-022 · AS568-024 → · Full size chart