SealSpec / O-rings / Size chart / AS568-114

AS568-114 O-ring · 5/8 ID × 3/32 cross-section

Standard AS568 size -114: 0.612 in inside diameter × 0.103 in cross-section (15.54 × 2.62 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-114 O-ring dimensioned drawing, 0.612 inch ID by 0.103 inch cross-section, outside diameter 0.818 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-114
Inside diameter	0.612 ± 0.009
Cross-section	0.103 ± 0.003
Outside diameter (calculated)	0.818
Nominal	5/8 × 13/16 × 3/32

Dimensions (mm)

Inside diameter	15.54 ± 0.23
Cross-section	2.62 ± 0.08
Outside diameter (calc.)	20.78

Material options for -114

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -114

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.103 in)

-110 0.362 -111 0.424 -112 0.487 -113 0.549 -114 0.612 -115 0.674 -116 0.737 -117 0.799 -118 0.862

← AS568-113 · AS568-115 → · Full size chart