SealSpec / O-rings / Size chart / AS568-117

AS568-117 O-ring · 13/16 ID × 3/32 cross-section

Standard AS568 size -117: 0.799 in inside diameter × 0.103 in cross-section (20.29 × 2.62 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-117 O-ring dimensioned drawing, 0.799 inch ID by 0.103 inch cross-section, outside diameter 1.005 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-117
Inside diameter	0.799 ± 0.010
Cross-section	0.103 ± 0.003
Outside diameter (calculated)	1.005
Nominal	13/16 × 1 × 3/32

Dimensions (mm)

Inside diameter	20.29 ± 0.25
Cross-section	2.62 ± 0.08
Outside diameter (calc.)	25.53

Material options for -117

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -117

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.103 in)

-113 0.549 -114 0.612 -115 0.674 -116 0.737 -117 0.799 -118 0.862 -119 0.924 -120 0.987 -121 1.049

← AS568-116 · AS568-118 → · Full size chart