SealSpec / O-rings / Size chart / AS568-314

AS568-314 O-ring · 3/4 ID × 3/16 cross-section

Standard AS568 size -314: 0.725 in inside diameter × 0.210 in cross-section (18.42 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-314 O-ring dimensioned drawing, 0.725 inch ID by 0.210 inch cross-section, outside diameter 1.145 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-314
Inside diameter	0.725 ± 0.010
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	1.145
Nominal	3/4 × 1 1/8 × 3/16

Dimensions (mm)

Inside diameter	18.42 ± 0.25
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	29.08

Material options for -314

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -314

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-310 0.475 -311 0.537 -312 0.600 -313 0.662 -314 0.725 -315 0.787 -316 0.850 -317 0.912 -318 0.975

← AS568-313 · AS568-315 → · Full size chart