SealSpec / O-rings / Size chart / AS568-317

AS568-317 O-ring · 15/16 ID × 3/16 cross-section

Standard AS568 size -317: 0.912 in inside diameter × 0.210 in cross-section (23.16 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-317 O-ring dimensioned drawing, 0.912 inch ID by 0.210 inch cross-section, outside diameter 1.332 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-317
Inside diameter	0.912 ± 0.010
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	1.332
Nominal	15/16 × 1 5/16 × 3/16

Dimensions (mm)

Inside diameter	23.16 ± 0.25
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	33.83

Material options for -317

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -317

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-313 0.662 -314 0.725 -315 0.787 -316 0.850 -317 0.912 -318 0.975 -319 1.037 -320 1.100 -321 1.162

← AS568-316 · AS568-318 → · Full size chart