SealSpec / O-rings / Size chart / AS568-319

AS568-319 O-ring · 1 1/16 ID × 3/16 cross-section

Standard AS568 size -319: 1.037 in inside diameter × 0.210 in cross-section (26.34 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-319 O-ring dimensioned drawing, 1.037 inch ID by 0.210 inch cross-section, outside diameter 1.457 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-319
Inside diameter	1.037 ± 0.010
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	1.457
Nominal	1 1/16 × 1 7/16 × 3/16

Dimensions (mm)

Inside diameter	26.34 ± 0.25
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	37.01

Material options for -319

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -319

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-315 0.787 -316 0.850 -317 0.912 -318 0.975 -319 1.037 -320 1.100 -321 1.162 -322 1.225 -323 1.287

← AS568-318 · AS568-320 → · Full size chart