SealSpec / O-rings / Size chart / AS568-386

AS568-386 O-ring · 17 ID × 3/16 cross-section

Standard AS568 size -386: 16.955 in inside diameter × 0.210 in cross-section (430.66 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-386 O-ring dimensioned drawing, 16.955 inch ID by 0.210 inch cross-section, outside diameter 17.375 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-386
Inside diameter	16.955 ± 0.080
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	17.375
Nominal	17 × 17 3/8 × 3/16

Dimensions (mm)

Inside diameter	430.66 ± 2.03
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	441.32

Material options for -386

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -386

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-382 12.975 -383 13.975 -384 14.975 -385 15.955 -386 16.955 -387 17.955 -388 18.955 -389 19.955 -390 20.955

← AS568-385 · AS568-387 → · Full size chart