SealSpec / O-rings / Size chart / AS568-384

AS568-384 O-ring · 15 ID × 3/16 cross-section

Standard AS568 size -384: 14.975 in inside diameter × 0.210 in cross-section (380.37 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-384 O-ring dimensioned drawing, 14.975 inch ID by 0.210 inch cross-section, outside diameter 15.395 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-384
Inside diameter	14.975 ± 0.070
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	15.395
Nominal	15 × 15 3/8 × 3/16

Dimensions (mm)

Inside diameter	380.37 ± 1.78
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	391.03

Material options for -384

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -384

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-380 11.475 -381 11.975 -382 12.975 -383 13.975 -384 14.975 -385 15.955 -386 16.955 -387 17.955 -388 18.955

← AS568-383 · AS568-385 → · Full size chart