SealSpec / O-rings / Size chart / AS568-432

AS568-432 O-ring · 5 3/8 ID × 1/4 cross-section

Standard AS568 size -432: 5.350 in inside diameter × 0.275 in cross-section (135.89 × 6.99 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-432 O-ring dimensioned drawing, 5.350 inch ID by 0.275 inch cross-section, outside diameter 5.900 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-432
Inside diameter	5.350 ± 0.037
Cross-section	0.275 ± 0.006
Outside diameter (calculated)	5.900
Nominal	5 3/8 × 5 7/8 × 1/4

Dimensions (mm)

Inside diameter	135.89 ± 0.94
Cross-section	6.99 ± 0.15
Outside diameter (calc.)	149.86

Material options for -432

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -432

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.275 in)

-428 4.850 -429 4.975 -430 5.100 -431 5.225 -432 5.350 -433 5.475 -434 5.600 -435 5.725 -436 5.850

← AS568-431 · AS568-433 → · Full size chart