SealSpec / O-rings / Size chart / AS568-434

AS568-434 O-ring · 5 5/8 ID × 1/4 cross-section

Standard AS568 size -434: 5.600 in inside diameter × 0.275 in cross-section (142.24 × 6.99 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-434 O-ring dimensioned drawing, 5.600 inch ID by 0.275 inch cross-section, outside diameter 6.150 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-434
Inside diameter	5.600 ± 0.037
Cross-section	0.275 ± 0.006
Outside diameter (calculated)	6.150
Nominal	5 5/8 × 6 1/8 × 1/4

Dimensions (mm)

Inside diameter	142.24 ± 0.94
Cross-section	6.99 ± 0.15
Outside diameter (calc.)	156.21

Material options for -434

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -434

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.275 in)

-430 5.100 -431 5.225 -432 5.350 -433 5.475 -434 5.600 -435 5.725 -436 5.850 -437 5.975 -438 6.225

← AS568-433 · AS568-435 → · Full size chart