SealSpec / O-rings / Size chart / AS568-457

AS568-457 O-ring · 14 ID × 1/4 cross-section

Standard AS568 size -457: 13.975 in inside diameter × 0.275 in cross-section (354.97 × 6.99 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-457 O-ring dimensioned drawing, 13.975 inch ID by 0.275 inch cross-section, outside diameter 14.525 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-457
Inside diameter	13.975 ± 0.070
Cross-section	0.275 ± 0.006
Outside diameter (calculated)	14.525
Nominal	14 × 14 1/2 × 1/4

Dimensions (mm)

Inside diameter	354.97 ± 1.78
Cross-section	6.99 ± 0.15
Outside diameter (calc.)	368.94

Material options for -457

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -457

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.275 in)

-453 11.975 -454 12.475 -455 12.975 -456 13.475 -457 13.975 -458 14.475 -459 14.975 -460 15.475 -461 15.955

← AS568-456 · AS568-458 → · Full size chart