SealSpec / O-rings / Size chart / AS568-460

AS568-460 O-ring · 15 1/2 ID × 1/4 cross-section

Standard AS568 size -460: 15.475 in inside diameter × 0.275 in cross-section (393.07 × 6.99 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-460 O-ring dimensioned drawing, 15.475 inch ID by 0.275 inch cross-section, outside diameter 16.025 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-460
Inside diameter	15.475 ± 0.070
Cross-section	0.275 ± 0.006
Outside diameter (calculated)	16.025
Nominal	15 1/2 × 16 × 1/4

Dimensions (mm)

Inside diameter	393.07 ± 1.78
Cross-section	6.99 ± 0.15
Outside diameter (calc.)	407.03

Material options for -460

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -460

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.275 in)

-456 13.475 -457 13.975 -458 14.475 -459 14.975 -460 15.475 -461 15.955 -462 16.455 -463 16.955 -464 17.455

← AS568-459 · AS568-461 → · Full size chart