SealSpec / O-rings / Size chart / AS568-010

AS568-010 O-ring · 1/4 ID × 1/16 cross-section

Standard AS568 size -010: 0.239 in inside diameter × 0.070 in cross-section (6.07 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-010 O-ring dimensioned drawing, 0.239 inch ID by 0.070 inch cross-section, outside diameter 0.379 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-010
Inside diameter	0.239 ± 0.005
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.379
Nominal	1/4 × 3/8 × 1/16

Dimensions (mm)

Inside diameter	6.07 ± 0.13
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	9.63

Material options for -010

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -010

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-006 0.114 -007 0.145 -008 0.176 -009 0.208 -010 0.239 -011 0.301 -012 0.364 -013 0.426 -014 0.489

← AS568-009 · AS568-011 → · Full size chart