SealSpec / O-rings / Size chart / AS568-014

AS568-014 O-ring · 1/2 ID × 1/16 cross-section

Standard AS568 size -014: 0.489 in inside diameter × 0.070 in cross-section (12.42 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-014 O-ring dimensioned drawing, 0.489 inch ID by 0.070 inch cross-section, outside diameter 0.629 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-014
Inside diameter	0.489 ± 0.005
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.629
Nominal	1/2 × 5/8 × 1/16

Dimensions (mm)

Inside diameter	12.42 ± 0.13
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	15.98

Material options for -014

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -014

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-010 0.239 -011 0.301 -012 0.364 -013 0.426 -014 0.489 -015 0.551 -016 0.614 -017 0.676 -018 0.739

← AS568-013 · AS568-015 → · Full size chart