SealSpec / O-rings / Size chart / AS568-017

AS568-017 O-ring · 11/16 ID × 1/16 cross-section

Standard AS568 size -017: 0.676 in inside diameter × 0.070 in cross-section (17.17 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-017 O-ring dimensioned drawing, 0.676 inch ID by 0.070 inch cross-section, outside diameter 0.816 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-017
Inside diameter	0.676 ± 0.009
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.816
Nominal	11/16 × 13/16 × 1/16

Dimensions (mm)

Inside diameter	17.17 ± 0.23
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	20.73

Material options for -017

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -017

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-013 0.426 -014 0.489 -015 0.551 -016 0.614 -017 0.676 -018 0.739 -019 0.801 -020 0.864 -021 0.926

← AS568-016 · AS568-018 → · Full size chart