SealSpec / O-rings / Size chart / AS568-019

AS568-019 O-ring · 13/16 ID × 1/16 cross-section

Standard AS568 size -019: 0.801 in inside diameter × 0.070 in cross-section (20.35 × 1.78 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-019 O-ring dimensioned drawing, 0.801 inch ID by 0.070 inch cross-section, outside diameter 0.941 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-019
Inside diameter	0.801 ± 0.009
Cross-section	0.070 ± 0.003
Outside diameter (calculated)	0.941
Nominal	13/16 × 15/16 × 1/16

Dimensions (mm)

Inside diameter	20.35 ± 0.23
Cross-section	1.78 ± 0.08
Outside diameter (calc.)	23.90

Material options for -019

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -019

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.070 in)

-015 0.551 -016 0.614 -017 0.676 -018 0.739 -019 0.801 -020 0.864 -021 0.926 -022 0.989 -023 1.051

← AS568-018 · AS568-020 → · Full size chart