SealSpec / O-rings / Size chart / AS568-226

AS568-226 O-ring · 2 ID × 1/8 cross-section

Standard AS568 size -226: 1.984 in inside diameter × 0.139 in cross-section (50.39 × 3.53 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-226 O-ring dimensioned drawing, 1.984 inch ID by 0.139 inch cross-section, outside diameter 2.262 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-226
Inside diameter	1.984 ± 0.018
Cross-section	0.139 ± 0.004
Outside diameter (calculated)	2.262
Nominal	2 × 2 1/4 × 1/8

Dimensions (mm)

Inside diameter	50.39 ± 0.46
Cross-section	3.53 ± 0.10
Outside diameter (calc.)	57.45

Material options for -226

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -226

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.139 in)

-222 1.484 -223 1.609 -224 1.734 -225 1.859 -226 1.984 -227 2.109 -228 2.234 -229 2.359 -230 2.484

← AS568-225 · AS568-227 → · Full size chart