SealSpec / O-rings / Size chart / AS568-229

AS568-229 O-ring · 2 3/8 ID × 1/8 cross-section

Standard AS568 size -229: 2.359 in inside diameter × 0.139 in cross-section (59.92 × 3.53 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-229 O-ring dimensioned drawing, 2.359 inch ID by 0.139 inch cross-section, outside diameter 2.637 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-229
Inside diameter	2.359 ± 0.020
Cross-section	0.139 ± 0.004
Outside diameter (calculated)	2.637
Nominal	2 3/8 × 2 5/8 × 1/8

Dimensions (mm)

Inside diameter	59.92 ± 0.51
Cross-section	3.53 ± 0.10
Outside diameter (calc.)	66.98

Material options for -229

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -229

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.139 in)

-225 1.859 -226 1.984 -227 2.109 -228 2.234 -229 2.359 -230 2.484 -231 2.609 -232 2.734 -233 2.859

← AS568-228 · AS568-230 → · Full size chart