SealSpec / O-rings / Size chart / AS568-227

AS568-227 O-ring · 2 1/8 ID × 1/8 cross-section

Standard AS568 size -227: 2.109 in inside diameter × 0.139 in cross-section (53.57 × 3.53 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-227 O-ring dimensioned drawing, 2.109 inch ID by 0.139 inch cross-section, outside diameter 2.387 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-227
Inside diameter	2.109 ± 0.018
Cross-section	0.139 ± 0.004
Outside diameter (calculated)	2.387
Nominal	2 1/8 × 2 3/8 × 1/8

Dimensions (mm)

Inside diameter	53.57 ± 0.46
Cross-section	3.53 ± 0.10
Outside diameter (calc.)	60.63

Material options for -227

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -227

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.139 in)

-223 1.609 -224 1.734 -225 1.859 -226 1.984 -227 2.109 -228 2.234 -229 2.359 -230 2.484 -231 2.609

← AS568-226 · AS568-228 → · Full size chart