SealSpec / O-rings / Size chart / AS568-377

AS568-377 O-ring · 10 ID × 3/16 cross-section

Standard AS568 size -377: 9.975 in inside diameter × 0.210 in cross-section (253.37 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-377 O-ring dimensioned drawing, 9.975 inch ID by 0.210 inch cross-section, outside diameter 10.395 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-377
Inside diameter	9.975 ± 0.055
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	10.395
Nominal	10 × 10 3/8 × 3/16

Dimensions (mm)

Inside diameter	253.37 ± 1.40
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	264.03

Material options for -377

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -377

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-373 8.975 -374 9.225 -375 9.475 -376 9.725 -377 9.975 -378 10.475 -379 10.975 -380 11.475 -381 11.975

← AS568-376 · AS568-378 → · Full size chart