SealSpec / O-rings / Size chart / AS568-379

AS568-379 O-ring · 11 ID × 3/16 cross-section

Standard AS568 size -379: 10.975 in inside diameter × 0.210 in cross-section (278.77 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-379 O-ring dimensioned drawing, 10.975 inch ID by 0.210 inch cross-section, outside diameter 11.395 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-379
Inside diameter	10.975 ± 0.060
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	11.395
Nominal	11 × 11 3/8 × 3/16

Dimensions (mm)

Inside diameter	278.77 ± 1.52
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	289.43

Material options for -379

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -379

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-375 9.475 -376 9.725 -377 9.975 -378 10.475 -379 10.975 -380 11.475 -381 11.975 -382 12.975 -383 13.975

← AS568-378 · AS568-380 → · Full size chart