SealSpec / O-rings / Size chart / AS568-380

AS568-380 O-ring · 11 1/2 ID × 3/16 cross-section

Standard AS568 size -380: 11.475 in inside diameter × 0.210 in cross-section (291.47 × 5.33 mm). Dimensions, tolerances, groove check and material options for specifying this size in a production design.

AS568-380 O-ring dimensioned drawing, 11.475 inch ID by 0.210 inch cross-section, outside diameter 11.895 inch — Dimensioned drawing, proportional to ID/CSDownload SVG

Dimensions (inch)

Dash number	AS568-380
Inside diameter	11.475 ± 0.065
Cross-section	0.210 ± 0.005
Outside diameter (calculated)	11.895
Nominal	11 1/2 × 11 7/8 × 3/16

Dimensions (mm)

Inside diameter	291.47 ± 1.65
Cross-section	5.33 ± 0.13
Outside diameter (calc.)	302.13

Material options for -380

Viton / FKM Nitrile / Buna-N EPDM Silicone Fluorosilicone Neoprene

Check your groove for -380

Enter your gland dimensions. Results are nominal geometry.

Groove depth (in)Groove width (in)Installed ID / rod (in)

Open the full groove calculator →

Same cross-section (0.210 in)

-376 9.725 -377 9.975 -378 10.475 -379 10.975 -380 11.475 -381 11.975 -382 12.975 -383 13.975 -384 14.975

← AS568-379 · AS568-381 → · Full size chart